Saving Old Seagulls

Thank you Charles

Could someone please let me know the points gap
On the forty featherweight please
Serial number F275EE6
Thank you

Beautiful machine I have the long shaft version
Just ordered a new high tension lead for it

Got a video to post
But don’t know how to get it on

Hopefully video
Not going to play

Some pics

Thanks mucker

Thanks Charles
One on the way from John

Hi again
I have just yesterday purchased a SJP50504
Wouldn’t start fuel flowing no problem
Faint spark Wipac points but stuck together
Freed them up looking for the correct gap setting
It was going in the skip not bad condition at all
Apart from above has a champion D16plug in it

Yes it is the Amal 416 Looks like I have found the problem The two little arms that come down to hold the brass pin for the float One has been snapped sometime or other There has been a small hole drilled up one of the arms With a small piece of copper wire put through it And tied so the brass pin c...

Carb has had a good clean up all back together as should be Push the tickler to get the fuel going Problem is that the fuel won’t stop flowing from the tickler It is also dripping from the choke housing Stripped it down again the float is moving freely All back together same thing The fuel needle is...

Get a transom bracket it will drop your engine a good foot

Thank you very much for your help Keith
20w50 it will be.
Kind regards.

Can anyone tell me what the correct oil is for a lister sr2 marine gearbox.
Thanks.

Bought a thumbscrew lock for my 5hp seagull found out with the thumb screw being a flat bar.
The sliding bar lock is virtually useless is there any way to modify the flat t bar.
So the thumb screw lock can be used.
Thanks in advance.