Saving Old Seagulls

Hi I have what may be a silly question and the answer may be obvious but I need to ask. I have a 100 century direct drive with a 40 gearbox on it with a prop marked 40 plus and all is good. I have a prop marked 100 only and have tried to fit it on the prop shaft of the 40 gearbox. This is where it ...

Hi got keen and finally spent some money on a polish from the shop. Being born in Paisley Scotland I have always followed my parents lead and tried to be economical. No disrespect meant for other Scots :P . Anyhow I have been using all the you beaut remedies from You Tube to try and clean My SJP ...

Hi Jon thanks for the information. In the photos you can see I have a TD complete crankcase and quite a bit of the rest. I would like to try and complete it given the time and money. It all came in sack together with other bits for 40 pluses that I luckily got for $50. Anyhow as it was all together ...

Hey Collector you play around with other brands of older motors don't you? Can I PM you regarding a part for a little old Merc?
Cheers Bob

Hi all can you help me identify what year and model this flywheel assembly belongs to? Numbers and numbers are to hard for me.
Thanks Bob

I like that one Tam. How about a picture of Mick Jagger on it followed by “”Start Me Up””

Hi I need a wider feed back. Spent Sunday tidying up the 100 century for paint job. Block had old silver paint on it so that had to go, done. Moved to tank decided to take it back to bare copper, see what it looks like, got rid of most of the paint after hours of sanding and probably breathing lead ...

Thanks for the info. Handy to know if I happen to stumble upon an sd sometime and buy it that I have a spare bit for it.
Cheers

I meant would the tube have anything in common with the tapered shaft and the other bit?
Cheers Bob

Would the shaft have anything to do with this tapered shaft and the other thing?

Hi the previous images didn't work (hate technology) anyway I had a look and yeah it has a brass bush but it's on the bottom of the tube. it's all weird to me as I'm just learning about seagulls. Would this bush some how support a pinion or something like that?

Hi just have a question about a drive tube I have. It is 20 inches long and appears to have the clutch thread on the mounting bracket but it only has an inner diameter of 1/2 an inch which is quite small so the driveshaft must be really small, what motor would that have come off? Drive shaft must ...

I have a 100 century exhaust tube that is banged around and want to replace it with a spare from what I have been told is a 102 exhaust tube that may polish up ok. The 100 tube has 2 holes drilled in it and the 102 tube none. Would the water passage fitting on the 102 tube be enough/ or to much ...

When you have more than what you need buy the wife a present then get more.

Sorry the image didn't post hope it works this time.