Search found 84 matches
- Mon Sep 13, 2010 8:50 pm
- Forum: For Sale
- Topic: Curlew QB 4HP for sale
- Replies: 2
- Views: 5458
- Fri Sep 03, 2010 9:06 pm
- Forum: Help
- Topic: water problem
- Replies: 4
- Views: 6344
Re: water problem
done a back-flush today still coming out the vents no problem, put it in the test tank 6ft by 4ft pit that i dug in the garden with steel reinforced concrete walls water streaming out when idling, put her into gear water still coming out but not as much when idling, i would have thought when in gear...
- Thu Sep 02, 2010 9:56 pm
- Forum: Help
- Topic: water problem
- Replies: 4
- Views: 6344
water problem
as above, i have a 4 hp engine no esc 181 hh1, problem is after pushing my long-liner for a while engine stops,block is to hot to touch. she is certainly pulling water through, and then i get steam, have done a back flush water pouring out the vents, could it be maybe one or two vanes have broken on...
- Tue Aug 17, 2010 7:48 pm
- Forum: Help
- Topic: flywheel not turning
- Replies: 5
- Views: 6936
Re: flywheel not turning
filled it up with wd 40 and the plug was intact.
- Mon Aug 16, 2010 6:08 pm
- Forum: Help
- Topic: flywheel not turning
- Replies: 5
- Views: 6936
flywheel not turning
as above. came across a 5hp silver century in a skip of all things needs a few bits but i can order from john,gear lever works ok prop turning gear housing full of oil but when i put the pull rope on flywheel wont budge took the rope pull off looks clean enough inside is there a way to free this if ...
- Wed Aug 04, 2010 7:10 pm
- Forum: General Topics
- Topic: exploded drawing.
- Replies: 1
- Views: 3482
exploded drawing.
where would i find the above of a 4hp silver century esc 181 hh1 i have a service manual but the exploded gearbox drawings
are for forward reverse engines all help most welcome,
are for forward reverse engines all help most welcome,
- Wed Jul 28, 2010 10:41 pm
- Forum: Help
- Topic: carburetor
- Replies: 2
- Views: 4629
Re: carburetor
many thanks pizey,that filter was blocked also found out the washer next to it had deteriated replaced washer cleaned filter, going like a sewing machine now.
- Sat Jul 24, 2010 4:18 pm
- Forum: Help
- Topic: carburetor
- Replies: 2
- Views: 4629
carburetor
i have the amal 416 carb on my seagull no 181 hh1 problem is only getting drips of fuel pressing the primer still no fuel carb fills up slowly engine always starts first pull runs till carb empteys,plenty fuel coming from the tank to the carb. filled the block couple of nights ago with kettle descal...
- Sat Jul 10, 2010 11:22 pm
- Forum: Help
- Topic: needle float.
- Replies: 1
- Views: 3482
needle float.
hello everyone. as you will see this is my first post just joined today, i was cleaning the carb on my 5hp silver century today needle float fell out of all things onto grass in the harbour, two hours on my knees still did,nt find it are these avalable to buy on this site or is it a new carb, all ad...