Page 1 of 1
Bermudian Hull Build
Posted: Mon May 21, 2018 12:27 am
by doppler491
Decided at the last minute to build a new hull for this year’s RISR. Here are some pics of the process... In total three pieces of 1/4” plywood was used (for hull + deck). 1x2 was used to attach the deck to and 1x3 was used as stringers. Transom was I believe a spare piece of 1/2” that was laying around. Stitch and glue method utilized.
Re: Bermudian Hull Build
Posted: Mon May 21, 2018 12:30 am
by doppler491
More pics. Will post video when we test
Re: Bermudian Hull Build
Posted: Mon May 21, 2018 9:48 am
by Nudge
Hi
Is that the the same style as the pink one (I think it was number 13)?
What is over all width?
Re: Bermudian Hull Build
Posted: Mon May 21, 2018 10:44 am
by doppler491
Yes, same style as #13 but we are <16’ long. Width is mid 30s whereas in the 24’ hulls (like #13) it is less than 30”. The width is something we play around with as we try to find max speed.
Re: Bermudian Hull Build
Posted: Fri Jun 15, 2018 11:55 pm
by Nudge
Let us know haw you boat goes after the race... Good luck with it!