OP on the bay at the moment

[Horsley-Anarak]

Well expensive, interesting that it has the non spring SD type prop.

Must be a transition motor I guess.

Could the tank be the correct one?

H-A

[Oyster 49]

It's a brass early post war one, SDP, or early D, C or AC/AD. correct carb, but cylinder looks very corroded. Magneto looks ok.

Trying it on at that price. Is there no number? Can't see. could this be a bitsa, with SD cases built from bits with a correct bottom casting and cylinder etc? I really hope nobody from here pays £400 for that.

I paid £150 for an ON last summer in an open auction. Get real folks.

[Mike Killay]

Cannot find it, has it been removed?

[Horsley-Anarak]

It is still there, but price has been dropped to only £375.00.
http://www.ebay.co.uk/itm/British-Seagu ... 4ae881c2b4

H-A

[Adrian Dale]

Number looks very faint.. OP 3XX ??
Re the carb trumpet: I note the saw cut again closet to the mouth.. is this original? I presume it was to provide some method of chocking?
Note the flywheel nut is heavily flattened indicating some one has had a go at removing the flywheel.

AJ

[Hugz]

Seagullrestorer from Dover is one of us

viewtopic.php?f=2&t=4948&p=40501#p40501

[Charles uk]

AJ not a saw cut just the shape.

[Adrian Dale]

so is this slot/cut original? it doesn't seem to be evident on all trumpet intakes?

AJ

[Horsley-Anarak]

so is this slot/cut original? it doesn't seem to be evident on all trumpet intakes?

AJ

Untitled-1 copy.jpg

Looks like it has been cut with a hack saw, thread looks a bit knackered as well.

H-A

[Charles uk]

Sorry didn't see that saw cut, that is a war time trumpet, the pre war one narrows down after the thread.

[Oyster 49]

By the time that one has been bought collected and restored then you are going to be in for at least £950....

buying and collection - £400+
Magneto rebuild parts - £100
Tank build from parts - £200+
chroming leg and exhaust - £100
transom bracket - £75? If you can find one that is..
Skeg weld repair -£25+
misc parts HT lead, decal, throttle cable, paint etc. - £50

we really need to stop this ridiculous run of selling prices. To me that is a £100 engine. Beyond that you are just throwing money away. Daft thing is it may be post the Marston era, the switchover from Marston to British Seagull does seem a little fluid.

If we enthusiasts refuse to pay such prices then the whole bubble could burst and we can get on with enjoying our interest in these engines. The Swordfish sold recently for £13 is a far more interesting engine!

[Niander101]

I wish id kept the one I sold to Skytoyman That was more original and a runner!
think it went for about £230...carnt remember exactly .
Why the silly saw cut...maybe for some sort of silly choke slotted in there?
I haven't seen Skytoyman on here for a while?

[flyguy]

£950! That is expensive, its maybe because idiots like me pay stupid money
I thaught my 40 - was a bargain, engine and delivery for £102
are the prices going up because its Springtime?
I see some expensive stuff
like
161672926126 starting at £190
Then I see this 141639986423 going for £50 too powerful for me
What prices do the experts think right for a 25/1 40 plus

[Oyster 49]

prices are going up because people are prepared to pay. I hope the individual who paid over £600 for a OP is cursing now. Because that was ridiculous in the extreme. What's that going to owe him by the time it is fully restored? think about it.

£190 starting price for a clutched 40 plus is a non starter. reduce it to 0.99 and put a £125 reserve and that one will go, as that model is a nice one to own.

People are seeing $ and trying it on. If buyers say NO then we will get reality back. remember a lot of people selling on eBay are not really enthusiasts they are doing it to make a few bob on the side, we generally know who they are.

enthusiasts swap and sell amongst themselves at "between enthusiasts" prices.

[flyguy]

£600 Have a look at the one on gum-tree tonight
£785
when I say look, you can't actually see any pics or a model number