Swapping Exhaust tubes

You can talk about almost anything here

Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo

Post Reply
Still trying
Posts: 58
Joined: Sun May 01, 2016 6:55 am
Location: Beachmere QLD Australia

Swapping Exhaust tubes

Post by Still trying »

I have a 100 century exhaust tube that is banged around and want to replace it with a spare from what I have been told is a 102 exhaust tube that may polish up ok. The 100 tube has 2 holes drilled in it and the 102 tube none. Would the water passage fitting on the 102 tube be enough/ or to much venting for the exhaust or should I just plug it and drill 2 similar sized holes like on the 100 century tube? Some may think this is a silly question but I hate doing things twice then find out I stuffed up both times. :P
20160719_183536_resized (003).jpg
20160719_183509_resized (004).jpg
You do not have the required permissions to view the files attached to this post.
headdownarseup
Posts: 2484
Joined: Thu Apr 04, 2013 2:26 pm
Location: bristol

Re: Swapping Exhaust tubes

Post by headdownarseup »

You might find you only need to fill 1 hole in the 100 tube. Enlarge the lower hole so you can fit the 102 water pipe, and what's left you fill.
Measure twice drill once.


Jon
User avatar
Rob Ripley
Posts: 440
Joined: Fri Mar 10, 2006 11:38 am
Location: Melbourne, Australia

Re: Swapping Exhaust tubes

Post by Rob Ripley »

Not talking about the overflow hole in the drive tube ?
Post Reply