Protective coating

You can talk about almost anything here

Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo

Post Reply
Piglola123
Posts: 26
Joined: Wed Jul 05, 2017 5:52 pm
Location: Norwich

Protective coating

Post by Piglola123 »

Was there any coating applied to engines by BS I came across this today didn't look like it had been used much if any
You do not have the required permissions to view the files attached to this post.
User avatar
Robin Anderson
Posts: 191
Joined: Sat May 27, 2006 11:42 am
Location: Golant, Cornwall

Re: Protective coating

Post by Robin Anderson »

The Seagull manual recommended wiping the engine over with an oily rag after use to preserve the finish but it also stated that an alternative was to paint the complete engine (excluding the silencer) with spar varnish before first use. That may be what is on the handsome engine in the photo. I never tried that but providing the engine was grease free I suppose it might work ok. Once the varnish coating broke down however, water would soon get under it and I imagine it would get 'orrid and require regular re-coating. I have seen some engines where this had been done and the finish was a mucky yellow, peeling in places.
"Pleiades of Birdham"
MXWQ5
Post Reply