Page 1 of 1

SD/SDP gearbox end cap and Brass Tiller Arm needed

Posted: Fri Mar 07, 2014 10:29 am
by JERSEYMAN
Hello all, would anyone by any chance have a spare SD or SDP gear box end cap (without filler bung) as the one I have is badly cracked, even a complete gear box will do,

Also I am after a brass tiller arm with the complete bushing and washers, even at a push if someone has just the bushing and washers as I have a fairly tired tiller arm that would do for now but with no bush.

Thank You

Re: SD/SDP gearbox end cap and Brass Tiller Arm needed

Posted: Sun Mar 09, 2014 12:54 pm
by Oyster 49
Sorry Rene, can't help on either I'm afraid. The only end caps I have have the filler plug.

Re: SD/SDP gearbox end cap and Brass Tiller Arm needed

Posted: Mon Mar 10, 2014 1:54 am
by Hugz
Can't help re brass tiller but do have what appears to be an SD gearbox cap. It is probably off an AC/AD but to a visual inspection they appear to be the same. I have seen bunged caps on SD's so assume they are all interchangeable on 102's. Has the number 1259 if you can find the matching gearbox :D It weighs 367 grms and I'm on the other side of the world. Does Jan have any? Didn't all SD's have black painted steel tiller arms? I'm sure I've seen the bush and washers for sale somewhere.

Re: SD/SDP gearbox end cap and Brass Tiller Arm needed

Posted: Mon Mar 10, 2014 10:33 am
by Hugz
Oh dear. I think it knows it has a new home.

Re: SD/SDP gearbox end cap and Brass Tiller Arm needed

Posted: Mon Mar 10, 2014 11:12 am
by Jan
I've all the parts if you still need them.

Must check the condition of the SD end cap when I'm in the shed.

Jan

Re: SD/SDP gearbox end cap and Brass Tiller Arm needed

Posted: Fri Mar 14, 2014 7:05 pm
by JERSEYMAN
Thank you guys, I will send you a PM

Rene

Re: SD/SDP gearbox end cap and Brass Tiller Arm needed

Posted: Sat Mar 15, 2014 11:21 pm
by Jan
Hi Rene,

This is what I found in the shed.
P3150206.JPG
P3150208.JPG
Jan

Re: SD/SDP gearbox end cap and Brass Tiller Arm needed

Posted: Sat Mar 15, 2014 11:30 pm
by JERSEYMAN
That's it Jan :D

Will PM you

Re: SD/SDP gearbox end cap and Brass Tiller Arm needed

Posted: Tue Mar 25, 2014 9:24 pm
by JERSEYMAN
Jan, I thank you so much for helping me with the parts I needed, and Hugz for the offer, it is so nice to meet people that are driven by passion not money, especially in a little community like ours, very refreshing :D