Aluminium Anybody Post #2?
Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo
- Collector Inspector
- Posts: 4183
- Joined: Sun Jun 29, 2008 4:32 am
- Location: Perth Western Australia
- Contact:
Aluminium Anybody Post #2?
Well, the "little Ship" has come along very well indeed!
Here are pics of , somewhat nasty quality, of finished hull and upper splash bits. The new ship has been fully seam welded every plank, both sides. Technician is cleaning up continuous welds.
The "Jig" has been stored as of now. All welding operations resulted in less than 1% twist lengthwise. Cool eh?
Deck is done!
On its trailer as well.
Off to being painted proffessionally.
I have ordered one similar, for delivery end July 2011. (With transom plate height adjuster for ALL of my Old Dears) should be a sliding fit idea I have in mind. And still look the goods in any config from astern. Three different adjustable sliding jigs aye!
G, this is good!
B
Here are pics of , somewhat nasty quality, of finished hull and upper splash bits. The new ship has been fully seam welded every plank, both sides. Technician is cleaning up continuous welds.
The "Jig" has been stored as of now. All welding operations resulted in less than 1% twist lengthwise. Cool eh?
Deck is done!
On its trailer as well.
Off to being painted proffessionally.
I have ordered one similar, for delivery end July 2011. (With transom plate height adjuster for ALL of my Old Dears) should be a sliding fit idea I have in mind. And still look the goods in any config from astern. Three different adjustable sliding jigs aye!
G, this is good!
B
A chicken is one egg's way of becoming others
Re: Aluminium Anybody Post #2?
Will he be doing a production run or just one offs?
- Collector Inspector
- Posts: 4183
- Joined: Sun Jun 29, 2008 4:32 am
- Location: Perth Western Australia
- Contact:
Re: Aluminium Anybody Post #2?
I am doing this from my phone to server at home/office.................check later to see if this works.
Little Ship is painted. Not my choisce of colours but never mind.
This one has no flotation.............mine will.
My mate has many vintage engines to put on it but he has got a 2010 6Hp Yamaha as the primary source of Ergs.
(Wise Man) as being remote in our Southwest with something Old, while fun, may cost a body dearly.
Anyway, PICS so far...............
Little Ship is painted. Not my choisce of colours but never mind.
This one has no flotation.............mine will.
My mate has many vintage engines to put on it but he has got a 2010 6Hp Yamaha as the primary source of Ergs.
(Wise Man) as being remote in our Southwest with something Old, while fun, may cost a body dearly.
Anyway, PICS so far...............
A chicken is one egg's way of becoming others
-
- Posts: 2838
- Joined: Thu Aug 07, 2008 8:42 pm
- Location: Surrey
Re: Aluminium Anybody Post #2?
Looks good Bruce.
Not sure on the colours used. Is the red interior to hide the blood when you get bitten by a Croc?.
H-A
Not sure on the colours used. Is the red interior to hide the blood when you get bitten by a Croc?.
H-A
- Collector Inspector
- Posts: 4183
- Joined: Sun Jun 29, 2008 4:32 am
- Location: Perth Western Australia
- Contact:
Re: Aluminium Anybody Post #2?
Here are the latest pics, I will take some myself when I see it floating and underway.
Regards
B
Regards
B
A chicken is one egg's way of becoming others
- Collector Inspector
- Posts: 4183
- Joined: Sun Jun 29, 2008 4:32 am
- Location: Perth Western Australia
- Contact:
Re: Aluminium Anybody Post #2?
Well, Little Boat is just that and nothing else. Actually used it in the flesh with a couple of Old Dears just recently.
Very displacement. 8 knots no more.
Also, as I suspected previous, TOO BLOODY LIGHT in the water.
I will start thread about that with pics of Old Dears in use on it. Looks the part Aye but not what is the real deal.
More Later.
I cancelled my order for sister ship by the way. Wood conversion to Aluminium, no matter how diligent............does not work.
B
Very displacement. 8 knots no more.
Also, as I suspected previous, TOO BLOODY LIGHT in the water.
I will start thread about that with pics of Old Dears in use on it. Looks the part Aye but not what is the real deal.
More Later.
I cancelled my order for sister ship by the way. Wood conversion to Aluminium, no matter how diligent............does not work.
B
A chicken is one egg's way of becoming others
- Collector Inspector
- Posts: 4183
- Joined: Sun Jun 29, 2008 4:32 am
- Location: Perth Western Australia
- Contact:
Re: Aluminium Anybody Post #2?
Little Ship was on the water over the new year.
I have cancelled my order for one like it. Far too light!
Should be wood.
Mind you a 1928 Britannia and 1956 Australian Riptide Fisherman putting up and down was COOL!
These were taken after our River Fires so background a bit black...............
B
I have cancelled my order for one like it. Far too light!
Should be wood.
Mind you a 1928 Britannia and 1956 Australian Riptide Fisherman putting up and down was COOL!
These were taken after our River Fires so background a bit black...............
B
A chicken is one egg's way of becoming others
Re: Aluminium Anybody Post #2?
Lovely looking boat B - at the risk of being picky, can I just mention that Britannias didn't start out in life until 1932?
- Collector Inspector
- Posts: 4183
- Joined: Sun Jun 29, 2008 4:32 am
- Location: Perth Western Australia
- Contact:
Re: Aluminium Anybody Post #2?
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Last edited by Collector Inspector on Sat Feb 19, 2011 1:10 pm, edited 1 time in total.
A chicken is one egg's way of becoming others
Re: Aluminium Anybody Post #2?
Hello B - I have paperwork somewhere announcing the launch of Britannias in' 32 - they made that style through the rest of the '30's, which I think are far prettier than the post war models (at least through our 'modern' eyes I suppose).
I have some hazy recollection that they slightly reduced the engine capacity at some point, and that they changed cooling principles - the vacuum-by-prop method, water shoved up a horn scoop immediately behing the prop, and pumped cooling, which I think was much later.
I have some hazy recollection that they slightly reduced the engine capacity at some point, and that they changed cooling principles - the vacuum-by-prop method, water shoved up a horn scoop immediately behing the prop, and pumped cooling, which I think was much later.
- Collector Inspector
- Posts: 4183
- Joined: Sun Jun 29, 2008 4:32 am
- Location: Perth Western Australia
- Contact:
Re: Aluminium Anybody Post #2?
yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
A chicken is one egg's way of becoming others
- Collector Inspector
- Posts: 4183
- Joined: Sun Jun 29, 2008 4:32 am
- Location: Perth Western Australia
- Contact:
Re: Aluminium Anybody Post #2?
UPDATE!
I am not going in this direction at all. Especially this design and size and materials and................do not like it at all actually.
It is basically far too small and light.
I have just purchased plans on line for a stich glue basic with room to fit it out as I wish, will also be cheaper.
From these guys and this one in particular $49.50 Au.
https://www.bateau.com/studyplans/FL12_ ... ?prod=FL12
I read the demo build instructions and I know that I can do this easy.
http://www.bateau2.com/howto/sg101.php
It has room for a motor on the back and two others up front waiting their turn aye?
The fit out and seating variations can be noted in the photo gallery.
Excited!
B
I am not going in this direction at all. Especially this design and size and materials and................do not like it at all actually.
It is basically far too small and light.
I have just purchased plans on line for a stich glue basic with room to fit it out as I wish, will also be cheaper.
From these guys and this one in particular $49.50 Au.
https://www.bateau.com/studyplans/FL12_ ... ?prod=FL12
I read the demo build instructions and I know that I can do this easy.
http://www.bateau2.com/howto/sg101.php
It has room for a motor on the back and two others up front waiting their turn aye?
The fit out and seating variations can be noted in the photo gallery.
Excited!
B
A chicken is one egg's way of becoming others
- Charles uk
- Posts: 4955
- Joined: Wed Feb 27, 2008 4:38 pm
- Location: Maidenhead Berks UK
Re: Aluminium Anybody Post #2?
The build instructions are very simple & explain just about all the basic rules of stich & glue a valuable read for anyone considering building their first boat.
Make it idiot proof and someone will make a better idiot.
- The Tinker
- Posts: 283
- Joined: Mon Dec 27, 2010 9:18 am
- Location: Whangamata, New Zealand
Re: Aluminium Anybody Post #2?
It is possible to stitch and glue these boats out of aluminium. Modern panel glues used in the motor industry make it easy. The stitching can be done with rivets and ali angle in the corners. A light aluminium flat bottom boat would definitely be an advantage.
Re: Aluminium Anybody Post #2?
Collector & Others
Interesting!
I've been looking for plans for a flat bottomed 12ft American 'Jon Boat'. Any suggestions? Must be lightweight, yet tough. I'm at the stage of drawing my own.
The idea was to build it from aluminium using rivets & urethane. Welding light alloy distorts too much for my liking.
Rex
Interesting!
I've been looking for plans for a flat bottomed 12ft American 'Jon Boat'. Any suggestions? Must be lightweight, yet tough. I'm at the stage of drawing my own.
The idea was to build it from aluminium using rivets & urethane. Welding light alloy distorts too much for my liking.
Rex