rope pull handle

[niander]

Nice H-A

Bet no body can beat mine for absolute disgustingly cheep grotyness!??

[Collector Inspector]

I am feeling as though this is getting a bit Creepy.

At work today on a service call and WTF hanging on a bit of Mechanical Kit......



Could not find the pulley but..................................

Regards

C.I.

[THCL500J8]

On the subject of Rope Pull Handles, dads motors in the 60's had a wooden ball on the end of them, with a hole slightly bigger in one side than the other for the knot.
Every few years he would cut the rope and stick in a new one. I will always remember the length of the cord. He used to measure it from the tip of his middle finger to his shoulder

Now i really don't want to ask this question, but we are all friends here, so if you have one of these old pulls, How big is your Ball?
See, I knew this would come out badly.

What i mean to say is; What size is the wooden ball on the rope, Why you ask?

I remember that these floated, and as i lost them over the side on a number of occasions, in my youth.
And when the skipper had finished yelling at you, You just motored around in a circle and you just picked it up again. By then the yelling had most likely stopped.

Not like the black plastic handled thing i lost a few days ago. With British Seagull molded on it. Just like the one in Horsley-Anaraks picture.

[bikerboyfife]

Found at back of shed whilst tinkering

[THCL500J8]

WoW Thanks

Yep, that's the old ball on a string.
Should be able to find something at Bunings or Masters, to make a couple of them.

[Rob Ripley]

I know which, Id rather get whacked in the head with !

[THCL500J8]

Funny the head is about the only place i haven't been whacked, with one, but there's still time.

[Chilli Dog]

Brass pull handle

[Chilli Dog]

take your pick

[THCL500J8]

Brass, now that's one i wouldn't want to get whacked in the head with.

Nice collection Though.