Early SD Bits Needed

Post your wanted adds here

Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo

Post Reply
User avatar
seagull101
Posts: 405
Joined: Mon Jan 23, 2017 10:30 pm
Location: Scottish islands

Early SD Bits Needed

Post by seagull101 »

After a bronze non inscript clutch lever and a brass non chrome throttle lever.

Need them for my new SD575.

PM me what you have.

Jacob
User avatar
Hugz
Posts: 3282
Joined: Wed Mar 14, 2007 4:41 am
Location: Sydney

Re: Early SD Bits Needed

Post by Hugz »

I wire brushed off the nickel on a fuel cap so l assume you can do the same to the early amal throttle lever. SD 571 is in Germany. I don't have the details for 575 do I?

Edit: that's the half one 8)
User avatar
seagull101
Posts: 405
Joined: Mon Jan 23, 2017 10:30 pm
Location: Scottish islands

Re: Early SD Bits Needed

Post by seagull101 »

Yeah could do that but would rather leave a chrome one for someone who needs a chrome one. I assume it is a non chrome one i need for it???

Yep thats the one, ill get you full details once its built up, probabably by new years.

Jacob
User avatar
Hugz
Posts: 3282
Joined: Wed Mar 14, 2007 4:41 am
Location: Sydney

Re: Early SD Bits Needed

Post by Hugz »

Good O. Of the 37 levers documented 34 are brass so l think that is a safe conclusion. I'll publish the updated registry soon.
User avatar
Hugz
Posts: 3282
Joined: Wed Mar 14, 2007 4:41 am
Location: Sydney

Re: Early SD Bits Needed

Post by Hugz »

Couple of other things. Yours should have gearbox with nipples on starboard side and the crankcase on the tiller side should have a number... B3xxx. I wouldn't be too worried about the nipple orientation.
Post Reply