Fuel pipe ends

Post your wanted adds here

Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo

Post Reply
User avatar
JERSEYMAN
Posts: 665
Joined: Sun Jul 31, 2011 2:47 pm
Location: Jersey, Channel Islands

Fuel pipe ends

Post by JERSEYMAN »

Hi everyone, does anyone have a contact for a supplier for the brass fuel pipe ends and nuts for the rigid early Marston/SD/early Seagull fuel pipes as they are quite a faf to make and have now run out

Thank you all

Rene
User avatar
Oyster 49
Posts: 3311
Joined: Tue Oct 26, 2010 6:55 pm
Location: Derbyshire, UK

Re: Fuel pipe ends

Post by Oyster 49 »

Attachments
IMG_1227.JPG
User avatar
JERSEYMAN
Posts: 665
Joined: Sun Jul 31, 2011 2:47 pm
Location: Jersey, Channel Islands

Re: Fuel pipe ends

Post by JERSEYMAN »

Brilliant Adrian, exactly what I was after, I found myself loosing hours on the internet to find a supplier,
Thank you
User avatar
Oyster 49
Posts: 3311
Joined: Tue Oct 26, 2010 6:55 pm
Location: Derbyshire, UK

Re: Fuel pipe ends

Post by Oyster 49 »

Your very welcome Rene! Don't forget the flow bowl end is a 7/16 nut if I recall, so a slightly different ferrule at that end also.
User avatar
JERSEYMAN
Posts: 665
Joined: Sun Jul 31, 2011 2:47 pm
Location: Jersey, Channel Islands

Re: Fuel pipe ends

Post by JERSEYMAN »

Yes it’s a bugger, two different ferrules, two different nuts, I used to make then in batches but time seems scares at the moment.
Post Reply