FVP cases, crank, con-rod, piston

Place your for sale information here

Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo

Post Reply
User avatar
fleetingcontact
Posts: 275
Joined: Sat Aug 15, 2015 6:47 pm
Location:

FVP cases, crank, con-rod, piston

Post by fleetingcontact »

All in usable condition, I've measured the main bearings and they are within tolerance.

There is a cylinder head but it seems this engine was dropped at some point because there's a chunk broken off, which I have. Maybe it can be repaired.

Sale or swap.
Gannet
Posts: 816
Joined: Mon Feb 27, 2012 9:47 pm
Location: Cirencester

Re: FVP cases, crank, con-rod, piston

Post by Gannet »

HI, I am interested in the cylinder head,
I will send you a pm.

Jeremy
Gannet
Posts: 816
Joined: Mon Feb 27, 2012 9:47 pm
Location: Cirencester

Re: FVP cases, crank, con-rod, piston

Post by Gannet »

I am also interested in the con rod. Please send me a pm.

i would like to make a record of the serial numbers on the crank cases, so would be grateful if you could make a note those down here.

Thanks.

Jeremy
User avatar
fleetingcontact
Posts: 275
Joined: Sat Aug 15, 2015 6:47 pm
Location:

Re: FVP cases, crank, con-rod, piston

Post by fleetingcontact »

Two emails sent!
Post Reply