Any suggestions

Having problems with a Seagull? - ask an expert here

Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo

Post Reply
tambikeboy
Posts: 842
Joined: Sat Oct 29, 2016 2:01 pm
Location: Scotland

Any suggestions

Post by tambikeboy »

Hi china's any suggestions for removing this part would be appreciated thanks : :roll:
Attachments
20190621_181909.jpg
Roll me up and smoke me when I die
Regret is just a memory written on my brow
User avatar
Oyster 49
Posts: 3311
Joined: Tue Oct 26, 2010 6:55 pm
Location: Derbyshire, UK

Re: Any suggestions

Post by Oyster 49 »

Does it just screw onto a long stud? If so try a strap wrench, it could be an opposite thread to the rotation direction? I’ve never stripped one of these.

Drop John at SOS a line, he will know.
tambikeboy
Posts: 842
Joined: Sat Oct 29, 2016 2:01 pm
Location: Scotland

Re: Any suggestions

Post by tambikeboy »

Looks like it's screwed directly onto crank going the opposite way might be the way :D
Roll me up and smoke me when I die
Regret is just a memory written on my brow
User avatar
Nudge
Posts: 827
Joined: Sun Feb 15, 2015 2:43 am
Location: Auckland, New Zealand

Re: Any suggestions

Post by Nudge »

BFH :!:

No idea not seen one before! keep us posted.
"THE KING OF BLING"!
Is it better to over think, than not think at all?
User avatar
Charles uk
Posts: 4951
Joined: Wed Feb 27, 2008 4:38 pm
Location: Maidenhead Berks UK

Re: Any suggestions

Post by Charles uk »

Not screwed?

Just a tight push fit.
Make it idiot proof and someone will make a better idiot.
tambikeboy
Posts: 842
Joined: Sat Oct 29, 2016 2:01 pm
Location: Scotland

Re: Any suggestions

Post by tambikeboy »

Cheers china spot on again (yes tight fit) end result 12v out put appears to be an optional extra :oops:
Attachments
20190628_181607.jpg
Roll me up and smoke me when I die
Regret is just a memory written on my brow
Post Reply