A Long Shot

Post your wanted adds here

Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo

Post Reply
twostrokenut
Posts: 106
Joined: Tue May 01, 2007 6:35 pm
Location: Norfolk

A Long Shot

Post by twostrokenut »

I know this is a long shot , but does anyone know where I could get hold of a barrel and piston for a 78cc Marston , I have the chance of buying one , not quite sure which model , but it has an FNR gearbox , and advance and retard system fitted.
Thanks in advance.

Andy.
User avatar
charlesp
Posts: 2568
Joined: Mon Mar 06, 2006 1:37 pm
Location: Poole, Dorset, England

Post by charlesp »

That'll be an OF then - all the other FNR Marstons were 102cc.

The chances of you finding one are slim at best I'm afraid; it's the barrels that go.

If you still have the remains of the old one a repair just may be possible - there are one or two on this forum who have done this successfully.

Naturally you wouldn't want to use it very much.

Good luck
twostrokenut
Posts: 106
Joined: Tue May 01, 2007 6:35 pm
Location: Norfolk

Post by twostrokenut »

Thanks Charles , unlike most people , I would want to use it , for me that's where I get my enjoyment....actually using them.
A great shame about the barrel , as the rest of the motor is in remarkable condition.
I've put a few feelers out elsewhere , if nothing comes of these , I would have no hesitation in not buying it , I just can't be doing with motors cluttering my shed up , that I can't hear running.

Again many thanks Andy.
User avatar
charlesp
Posts: 2568
Joined: Mon Mar 06, 2006 1:37 pm
Location: Poole, Dorset, England

Post by charlesp »

Well if you don't want it I'll definitely put a bid in see your PMs
twostrokenut
Posts: 106
Joined: Tue May 01, 2007 6:35 pm
Location: Norfolk

Post by twostrokenut »

charlesp wrote:Well if you don't want it I'll definitely put a bid in see your PMs
No PMs Charles , have you sent one ??

Andy.
User avatar
charlesp
Posts: 2568
Joined: Mon Mar 06, 2006 1:37 pm
Location: Poole, Dorset, England

Post by charlesp »

Just sent another...
Post Reply