Shame on me!

Talk about and buy or sell boats that are suited to Seagull outboards here

Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo

Post Reply
User avatar
Hugz
Posts: 3282
Joined: Wed Mar 14, 2007 4:41 am
Location: Sydney

Shame on me!

Post by Hugz »

I bought a plastic boat. Plastic!

Funnily enough the previous owner had a seagull on it!
Screenshot_20230709_085121_Gumtree.jpg
andrew
Site Admin
Posts: 171
Joined: Wed May 24, 2017 5:37 pm
Location: ..

Re: Shame on me!

Post by andrew »

Walker Bay? Believe one attempted round the island in bermuda this year. Emphasis on attempted :)

I occasionally use an AF 40- on mine, a good light motor for the job when moving a full load of people or kit more than a short distance.

Find the keels tend to wear through over time on those, right at the stern. From being dragged over docks and rocks and the like. I add silicone most seasons to patch the reappearing hole!
User avatar
Hugz
Posts: 3282
Joined: Wed Mar 14, 2007 4:41 am
Location: Sydney

Re: Shame on me!

Post by Hugz »

Yes I've heard of the keel problem. Some good epoxies out there now so might look at putting a brass strip on. There is a wheel as well. I'm thinking a windsurfing sailing ring might work as a sail on it.

AF? I do have a little fvp l can put on it. A Walker Bay 8 correct.
User avatar
Hugz
Posts: 3282
Joined: Wed Mar 14, 2007 4:41 am
Location: Sydney

Re: Shame on me!

Post by Hugz »

Post Reply