Maybe I'm getting confused with spanner size where 1/2" and 13mm is the same. Maybe dementia has visited me
You've got more old plugs than me
Like your tin lizzy one.
Success rate in freeing seized motors
Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo
Re: Success rate in freeing seized motors
Isn't 13mm closer to half inch? I don't think 14mm will fit.
Maybe I'm getting confused with spanner size where 1/2" and 13mm is the same. Maybe dementia has visited me
You've got more old plugs than me
Like your tin lizzy one.
Maybe I'm getting confused with spanner size where 1/2" and 13mm is the same. Maybe dementia has visited me
You've got more old plugs than me
Like your tin lizzy one.
-
Adrian Dale
- Posts: 758
- Joined: Wed Apr 16, 2014 7:58 am
- Location: Tasmania, Australia
Re: Success rate in freeing seized motors
Gently does it and lots of heat after a good soak. on the 102's it hasn't failed yet.
No endangered plugs were injured in this photo shoot
AJ
No endangered plugs were injured in this photo shoot
AJ
- Attachments
-