Saving Old Seagulls

Im reworking an EFNR and have the engine working ok but need the tin cover which covers the flywheel...so I need help with someone who has a seized or dead one beyond help.

Ill post the part number up here when I find my cross reference.

Please PM or post here if you have parts you can part with.

On Ebay part listing # 220100509649

Listing says it's from a 1978 Forty, but according to the spares manual this flywheel cover fits all the Wipac IIIs including the EFNR. Looking at the other parts the seller has for sale, it appears he broke down an EFPC.

Thanks - Ill look into that tin...CatiGull

Still looking for EFNR bits for my

Now I need this motor not just for my Island 17 but also my 10 foot Watertender next summer - my kids keep getting bigger..

FYI I need the lower flywheel cover

ACC 99 005

for this engine, not the above listed stator cover

Stephen,
By lower cover do you mean the stator plate to which the ignition coil/components are attached? May have one, but one corner chipped off, no effect on performance, just that the top cover only attached with 3 bolts instead of 4. Can easily cobble something to gether for 4th corner if you are so desired. Mine will be coming off a 170, I am guessing this will also fit yours. Do you have all the appropriate spacers to attach plate via crankcase bolts?
Michael

I turned out the one listed above was what I needed so I got it (should be here soon). Im still not entirely sure of what bits I need to finish this motor Michael, so Ill stay in touch. Do have to get this one going as my FP is going to hard pressed to move all four of us in the new Watertender on tidal pond.

The plate above fit perfectly without spacers - Ill check the manual of course and see if I am missing anything.

Looks like my EFNR is on the way back into the water. Not bad for a freebie.....