Spanner jaw sizes
Posted: Sun Apr 24, 2022 5:08 pm
Now here’s a bit of gold for newcomers to this web site!
It’s a very well researched, comprehensive, well structured and well drafted compilation of the different jaw sizes appropriate to the different bolt sizes and systems . As far as I can make out, the author Paul Crawford was an engineering lecturer at the Dundee College of Technology.
When I accessed it about 6 years or so ago, it was quite simple to find, but now it is embedded in another site so I thought I would post a note here in the hope it is as useful to others as it has been to me
Put in Crawford Space Communications Ltd to Google and it should come up with the home page of www.crawford-space.co.uk where one can see a somewhat sardonic reference to a paper on spanner jaw sizes - it’s about 12 pages long and I suggest you print out 2 sets, one for the workshop and one for the file
Good luck!
Donald
It’s a very well researched, comprehensive, well structured and well drafted compilation of the different jaw sizes appropriate to the different bolt sizes and systems . As far as I can make out, the author Paul Crawford was an engineering lecturer at the Dundee College of Technology.
When I accessed it about 6 years or so ago, it was quite simple to find, but now it is embedded in another site so I thought I would post a note here in the hope it is as useful to others as it has been to me
Put in Crawford Space Communications Ltd to Google and it should come up with the home page of www.crawford-space.co.uk where one can see a somewhat sardonic reference to a paper on spanner jaw sizes - it’s about 12 pages long and I suggest you print out 2 sets, one for the workshop and one for the file
Good luck!
Donald