Saving Old Seagulls

Hello.
I am a new member so hello everyone.
I have a 1953 LS seagull,a seabee 4hp,a Campari 3h,and some old evinrude/johnson motors.
All have been rebuilt and are used on my boat.
Anyway what I need is an ignition coil for my seabee,this has the JLO L77 engine.
Or have any members ever rewound an outboard coil ?
Hope you can help me out.
Thank you.
Ray.

I have two seabee's, one that i may be pulling apart, as it has little or no compression and only just runs, but not doing it just yet.
I would like a seaking twin spark lead coil, but will never got one over hear.

pizey wrote:I have two seabee's, one that i may be pulling apart, as it has little or no compression and only just runs, but not doing it just yet.
I would like a seaking twin spark lead coil, but will never got one over hear.

Hello.
If you do decide to strip your seabee please let me know!(or sell complete engine)
You can e-mail me direct at gwengrice@talktalk.net
if you want.
I think you will have to get SEAKING coil from the USA have a look on the american ebay site or ask for one on i boats
forum in other makes section.
If I see one will let you know.
Regards
ray

Hello
You can get an ignition coil for your seaking from DISCOUNT MARINE PARTS in USA.
They do carb and ignition parts for all seakings.
Hope this helps
Regards
Ray.

Ray - there is a chap by the name of Mark Newby who is into all things Seabee and should be able to help you - I'll pm you his telephone number. Rick.

Its a single coil with two HT lead and I've never seen one for sale.