Saving Old Seagulls

Just a stab in the dark with this request aye.

The motor is complete and nice, recently imported down-under.......Mission.

Side mount bracket wanted as per the pics.


Hope so

Regards

B

Standard Wartime bracket part Bruce, ask Hugo he will have all the pictures of the bracket& there might be some on here.

Here you go Bruce, Hugo has got one of those brackets if I recall.

The lower picture has the correct thrust block but bracket has been cut and welded right at the top, to fit a much thinner hull, possibly on a transom.

Whereas the top picture has had a top support fitted in place as a thrust block, & some weird device attached to the top support, so no ability to tilt, don't hit anything underwater!

The black one I got, I always thought it had been modified by the owner to fit a transom until I cam across another identical bracket which indicates either they were made like that as I’ve never seen a wider version or several were modified together.

On closer inspection I think they were possibly manufactured like that as the piece were the arrow is pointing is a shaped one piece of metal forming an integral part of the bracket, if the bracket had been narrowed there would be a weld where the bracket had been cut.

Rene can you attach it onto a drive shaft tube & take a picture, from these pictures the top & bottom fitting don't look to line up.

Only a few known. I recall Hugo bought one a few years back?

I've seen 3 & I believe there were a total of 5 that were known about, a couple of years ago!