Page 1 of 1
Villiers carb please help!!
Posted: Sat Apr 19, 2008 8:35 pm
by S2P2G
HI ITS STEVE ET DOM AGAIN
CAN SOME ONE PLEASE TELL US HOW TO GET THE BLACK BOWL OFF THE
Villiers carb,BEFORE I BREAK IT.!!
Posted: Sat Apr 19, 2008 10:21 pm
by niander
unscrew it...normal way...
Posted: Sat Apr 19, 2008 10:36 pm
by Vic
normal way
IE Right hand thread
IT JUST TURNS AND TURNS ??
Posted: Sun Apr 20, 2008 8:23 am
by S2P2G
IT JUST TURNS AND TURNS ??
Posted: Sun Apr 20, 2008 9:26 am
by Vic
It's screwed onto the bottom of the centrepiece/jet assembly. Is that turning because the little grub-screw that retains it is missing (see part #11 and #13 in
this diagram from John's site
If the centrepiece is not turning then the threaded insert in the base of the bowl has come loose.
Note that the aforementioned grub-screw locates in the machined slot in the shoulder of the centrepiece not the round hole