villiers coil 40 series
Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo
-
- Posts: 1
- Joined: Mon Apr 21, 2014 9:22 am
- Location: Wales
villiers coil 40 series
I reckon my secondary coil is open circuit are they available anywhere?
Re: villiers coil 40 series
Yes, new and used, you could try John at SOS, also available on EBay and other major outlets.
Re: villiers coil 40 series
One may buy coils,Villiers and Wipac from villiersparts.co.uk These are new coils. They also offer an ignition (stator) plate exchange for about £75. You will get new plate,coil,points and condenser. They also do re-con or exchange Villers carbs.
Hope this helps.
Hope this helps.
- Stelios_Rjk
- Posts: 1458
- Joined: Sun Jun 17, 2012 10:15 pm
- Location: Athens - Greece
Re: villiers coil 40 series
Since it is villiers buy a new coil, original or replacement. Buying a used villiers coil means that you buy 60 years old stuff ready to fail. Unless you swap it with a wipac ignition.
I love the 10600/145 turns!!!
Re: villiers coil 40 series
I inquired some time back about a coil that I needed for another motor, £65 new, so I asked again about it being new, yes new old stock, so it was probably as old as the original and not something I would like to take a chance on, especially at that price, so I got a working used one for £15, and its still working.
Never liked the idea of Wipac coils on older motors, it stands out a mile that its not original with the screw plate rather than the wire bar holding the HT lead.
Never liked the idea of Wipac coils on older motors, it stands out a mile that its not original with the screw plate rather than the wire bar holding the HT lead.