villiers coil 40 series

Having problems with a Seagull? - ask an expert here

Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo

Post Reply
Bleeperman
Posts: 1
Joined: Mon Apr 21, 2014 9:22 am
Location: Wales

villiers coil 40 series

Post by Bleeperman »

I reckon my secondary coil is open circuit are they available anywhere?
Keith.P
Posts: 2837
Joined: Wed Oct 24, 2007 7:43 pm
Location: Hertfordshire
Contact:

Re: villiers coil 40 series

Post by Keith.P »

Yes, new and used, you could try John at SOS, also available on EBay and other major outlets.
sassi232
Posts: 4
Joined: Sat Mar 29, 2014 2:40 am
Location: Essex UK

Re: villiers coil 40 series

Post by sassi232 »

One may buy coils,Villiers and Wipac from villiersparts.co.uk These are new coils. They also offer an ignition (stator) plate exchange for about £75. You will get new plate,coil,points and condenser. They also do re-con or exchange Villers carbs.
Hope this helps.
User avatar
Stelios_Rjk
Posts: 1458
Joined: Sun Jun 17, 2012 10:15 pm
Location: Athens - Greece

Re: villiers coil 40 series

Post by Stelios_Rjk »

Since it is villiers buy a new coil, original or replacement. Buying a used villiers coil means that you buy 60 years old stuff ready to fail. Unless you swap it with a wipac ignition.
I love the 10600/145 turns!!!
Keith.P
Posts: 2837
Joined: Wed Oct 24, 2007 7:43 pm
Location: Hertfordshire
Contact:

Re: villiers coil 40 series

Post by Keith.P »

I inquired some time back about a coil that I needed for another motor, £65 new, so I asked again about it being new, yes new old stock, so it was probably as old as the original and not something I would like to take a chance on, especially at that price, so I got a working used one for £15, and its still working.
Never liked the idea of Wipac coils on older motors, it stands out a mile that its not original with the screw plate rather than the wire bar holding the HT lead.
Post Reply