Anyone tell me the correct way the lever goes on the stud ?
My guess is spring first, then lever through the large beveled hole, then washer and nut ?
The bolt through the main tube locking ring should be at the spark plug end ?
The end of the operating rod should ride over the locking ring to keep it out of gear ?
clutch lever 102
Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo
Re: clutch lever 102
Lever first, spring, washer, nut, clip.
Look at the clamp, one small part is not rounded, that's the part you line up to the end of the rod.
Yes.The end of the operating rod should ride over the locking ring to keep it out of gear?
Look at the clamp, one small part is not rounded, that's the part you line up to the end of the rod.
-
waterworks
- Posts: 34
- Joined: Thu Jul 30, 2015 1:47 am
- Location:
Re: clutch lever 102
OK got it now, thanks.