Coil wanted

[RAY SWANN]

Hello.
I am a new member so hello everyone.
I have a 1953 LS seagull,a seabee 4hp,a Campari 3h,and some old evinrude/johnson motors.
All have been rebuilt and are used on my boat.
Anyway what I need is an ignition coil for my seabee,this has the JLO L77 engine.
Or have any members ever rewound an outboard coil ?
Hope you can help me out.
Thank you.
Ray.

[Keith.P]

I have two seabee's, one that i may be pulling apart, as it has little or no compression and only just runs, but not doing it just yet.
I would like a seaking twin spark lead coil, but will never got one over hear.

[RAY SWANN]

I have two seabee's, one that i may be pulling apart, as it has little or no compression and only just runs, but not doing it just yet.
I would like a seaking twin spark lead coil, but will never got one over hear.

Hello.
If you do decide to strip your seabee please let me know!(or sell complete engine)
You can e-mail me direct at gwengrice@talktalk.net
if you want.
I think you will have to get SEAKING coil from the USA have a look on the american ebay site or ask for one on i boats
forum in other makes section.
If I see one will let you know.
Regards
ray

[RAY SWANN]

Hello
You can get an ignition coil for your seaking from DISCOUNT MARINE PARTS in USA.
They do carb and ignition parts for all seakings.
Hope this helps
Regards
Ray.

[RickUK]

Ray - there is a chap by the name of Mark Newby who is into all things Seabee and should be able to help you - I'll pm you his telephone number. Rick.

[Keith.P]

Its a single coil with two HT lead and I've never seen one for sale.